AOpen GP1 Series Uživatelský manuál stáhnout pdf (Strana 18)

LV-667 User’s Manual Hardware Setup

Enhanced IDE & CF Interface

2.6 <Enhanced IDE & CF Interface>

The board supports two enhanced IDE interface, dual channel for 4 ATAPI devices with

ATA133. Based on embedded application, the board has one 40-pin IDE connector with

jumper selectable for pin-20 +5V supported, and one 44-pin IDE connector. The jumper

JDOM is two-pin type for pin-20 supplied with +5V to apply the DOM (Disk on Module).

The board also provides a Compact Flash Type II socket with jumper (JCFSEL) selectable

slave/Master mode on secondary IDE channel.

Jumper: JDOM

Type: onboard 3-pin header

JDOM Mode

ON IDE1 pin-20 5V power supply enable

OFF No 5V power supply on IDE1 pin-20

Default setting

Jumper: JCFSEL

Type: onboard 3-pin header

JCFSEL Mode

1-2 Master

2-3 Slave

Default setting

JDOM

IDE1

IDE2

JCFSEL

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 57 58

Žádné komentáře

AOpen GP1 Series Uživatelský manuál Strana 18